INFOLINKA
C66
The equipment for contact welding of welding studs C66 is one of the smallest and lightest units in its performance class on the market and it can therefore also be used as a portable device. The graphic display, easy to read even in the sun, shows easy to read information about the adjustments made and the current status. Expressive icons and logically built menus provides clear structured guidance to the operator with only three buttons - regardless of language. Precisely reproducible charging voltage, precise sequential control and continuous automatic control of all functional sequences ensure excellent welding uniformity. Due to the use of an automatic voltage selector, the device works without problems on all power supply systems from 95 volts to 120 volts or 190 volts to 240 volts with a frequency of 50 or 60 Hz.
|
Studs |
Contact gun P05-K |
Drawn arc gun P05-S |
||||||
|
Steel copper coated |
Stainless steel |
Aluminium |
Brass |
Steel copper coated |
Stainless steel |
Aluminium |
Brass |
|
|
Welding studs |
M3 - M8 |
M3 - M8 |
M3 - M5 |
M3 - M8 |
M3 - M8 |
M3 - M8 |
M3 - M6 |
M3 - M8 |
|
M6 |
||||||||
|
Pins |
Ø3 - Ø7,1 |
Ø3 - Ø7,1 |
Ø3 - Ø5 |
Ø3 - Ø7,1 |
Ø3 - Ø7,1 |
Ø3 - Ø7,1 |
Ø3 - Ø6 |
Ø3 - Ø7,1 |
|
Ø6 |
||||||||
|
Welding studs with internal thread |
M3 - M5 |
M3 - M5 |
M3 |
M3 - M5 |
M3 - M5 |
M3 - M5 |
M3 - M4 |
M3 - M5 |
|
M4 |
||||||||
|
Insulation weld pin type ISN |
Ø2 - Ø5 |
Ø2 - Ø5 |
Ø2 - Ø5 |
Ø2 - Ø5 |
Ø2 - Ø5 |
Ø2 - Ø5 |
Ø2 - Ø5 |
Ø2 - Ø5 |
|
Grounding connector |
FL1/FL2 |
FL1/FL2 |
FL1/FL2 |
FL1/FL2 |
FL1/FL2 |
FL1/FL2 |
FL1/FL2 |
FL1/FL2 |
|
Studs with gross thread |
T5 |
T5 |
T5 |
T5 |
||||
|
Good weldable |
Weldable |
|
Type |
C66 |
|
Source of welding energy |
Aluminium capacitors |
|
Capacity |
66.000μF |
|
Charging voltage |
50 - 200V fully adjustable in steps of ± 1V |
|
Maximum charging energy |
1320 Ws at 200V |
|
Welding sequence |
Ø3 mm - 40 studs/Min. Ø8mm - 5 studs/Min. |
|
Charge control |
electronic: primarily clocked, short circuit resistant, temperature monitored |
|
Control |
microcontroller: 16 bit, 20MHz, Flash |
|
Display |
LCD: DSTN, 128 x 64 pixels, readable in the sun |
|
Welding methods |
Contact and using displacement |
|
Cable connection |
Installed housings: 35/50 mm² with quick locking system |
|
Electrical power |
Electrical power |
|
Power voltage |
Automatic selection (90 - 120 V, 50 - 60 Hz / 190 - 240 V, 50 - 60 Hz) |
|
Energy consumption |
500 VA (maximum) |
|
Cabinet / Protection class |
Stainless steel: WS 1.4016 / IP23 |
|
Operating conditions |
Temperature: -10...45° C (Operating), -10...70° (Storage) / Humidity :80%, no dew |
|
Weight |
6,5kg |
|
Dimensions |
155x185x285 mm (width x height x depth) |
