INFOLINKA
Heat-Sert - HDBRHE
The Heat-SertTM has been designed for post mould installation into notch-sensitive thermoplastics using heat.
The rounded knurls alleviate stress in the mating boss.
Heat-SertTM is installed using heat and must be ensured that the insert softens, but does not melt the plastic which helps avoid flash forming around the top of the insert.
Advantages:
- Designed specifically for notch-sensitive plastics
- Symmetrical design for automated installation
- High pull out and torque resistance
| Thread | M2* | M2,5* | M3 | M3,5 | M4 | M5 | M6 | M8* |
| L mm | 3,9 | 5,8 | 5,8 | 7,1 | 8,1 | 9,5 | 12,7 | 12,7 |
| K mm | 3,5 | 4,4 | 4,4 | 5,2 | 6,1 | 6,9 | 8,5 | 10,0 |
| B mm | 0,51 | 0,58 | 0,58 | 0,74 | 0,89 | 1,07 | 1,32 | 1,32 |
| C mm | 4,8 | 5,5 | 5,5 | 6,4 | 7,1 | 7,9 | 9,5 | 11,1 |
| N mm | 3,1 | 3,9 | 3,9 | 4,7 | 5,5 | 6,3 | 7,9 | 9,5 |
| Recommended hole mm (-0/+0,1) | 3,2 | 4,0 | 4,0 | 4,8 | 5,6 | 6,4 | 8,0 | 9,6 |
| Minimum wall thickness mm | 1,4 | 1,8 | 1,8 | 2,1 | 2,4 | 2,8 | 3,6 | 5,0 |
* - Not preferred – ask for availability
