INFOLINKA
Flow-Sert - UHBRFL
Flow-SertTM is a blind insert, designed to be installed during the moulding process.
Flow-SertTM The Flow-SertTM is designed to be installed during moulding. It is critical that the mould pin used is designed to locate the Flow-SertTM and prevent plastic ingress.
Please contact us for mould pin design assistance.
Advantages:
- The blind end prevents plastic ingress during moulding
- Very high pull out and torque resistance
Thread | M2* | M2,5* | M3 | M3,5 | M4 | M5 | M6 | M8 | M10* |
L mm | 5,5 | 6,4 | 7,3 | 9,2 | 10,2 | 11,2 | 14,4 | 16,5 | 17,9 |
K mm | 3,4 | 4,3 | 4,7 | 5,5 | 6,3 | 7,3 | 9,8 | 11,4 | 13,8 |
A min mm |
3,6 | 4,0 | 4,6 | 6,0 | 6,7 | 7,4 | 8,1 | 11,1 | 11,9 |
C mm | 1,0 | 1,2 | 1,3 | 1,6 | 1,8 | 2,0 | 2,0 | 2,3 | 2,4 |
* - Non preferred - Please enquire for availability