INFOLINKA
+420 703 438 986
Fin-Sert - UHBRFI
The Fin-SertTM is a press-in insert, designed for post mould installation into thermoplastics.
The combination of fins and knurls provides good levels of pull out and torque resistance.
The Fin-SertTM should be installed with a press that can provide a steady squeezing action to prevent damage to the mating boss.
Advantages:
- Simple, press-in installation
- Free running female thread
- Good pull out and torque resistance
| Thread | M2* | M2,5* | M3 | M3,5 | M4 | M5 | M6 | M8 |
| L mm | 4,0 | 4,8 | 4,8 | 6,4 | 7,9 | 9,5 | 12,7 | 12,7 |
| K mm | 3,7 | 4,5 | 4,5 | 5,3 | 6,1 | 7,0 | 8,6 | 10,2 |
| N mm | 3,1 | 3,9 | 3,9 | 4,7 | 5,5 | 6,3 | 7,9 | 9,5 |
| Recommended hole mm (-0/+0,1) | 3,2 | 4,0 | 4,0 | 4,8 | 5,6 | 6,4 | 8,0 | 9,6 |
| Minimum wall thickness mm | 1,6 | 2,0 | 2,0 | 2,4 | 2,8 | 3,2 | 4,0 | 4,8 |
* - Not preferred – ask for availability
