INFOLINKA
Broaching-Sert - UHBRBR
Broaching-SertTM is a press-in insert, designed for post mould installation into thermosets.
The sharp knurls of the insert cut into the mating material during installation thereby reducing stress in brittle thermosets.
Broaching-SertTM should be installed with a press that can provide a steady squeezing action to prevent damage to the mating boss. The insert should be allowed to freely rotate during installation.
Advantages:
- Simple, press-in installation
- Allows for thin walls in the boss
- Good pull out and torque resistance
| Thread | M2,5* | M3 | M3,5 | M4 | M5 | M6 | M8 | M10* |
| L mm | 6,0 | 6,0 | 8,0 | 8,0 | 10,0 | 14,0 | 15,0 | 18,0 |
| B mm | 0,58 | 0,58 | 0,73 | 0,89 | 1,06 | 1,32 | 1,32 | 1,57 |
| C mm | 6,0 | 6,5 | 8,5 | 8,0 | 9,5 | 12,4 | 14,0 | 16,0 |
| K max mm | 4,5 | 5,0 | 6,0 | 6,5 | 8,0 | 10,0 | 12,0 | 14,0 |
| Recommended hole for thermoplastics mm | 4,0-4,1 | 4,5-4,6 | 5,3-5,4 | 5,8-5,9 | 7,1-7,2 | 8,6-8,8 | 10,6-10,8 | 12,-12,8 |
| Recommended hole for thermosets mm | 4,1-4,3 | 4,6-4,8 | 5,5-5,7 | 6,0-6,2 | 7,3-7,6 | 9,0-9,4 | 11,0-11,4 | 13,0-13,4 |
* - Not preferred – ask for availability
